diff --git a/ipmitool/doc/Makefile.am b/ipmitool/doc/Makefile.am
index 0544053..4cc27a8 100644
--- a/ipmitool/doc/Makefile.am
+++ b/ipmitool/doc/Makefile.am
@@ -39,13 +39,15 @@ EXTRA_DIST		= ipmitool.1.in
 
 install-data-hook:
 	if test @IPMITOOL_BIN@ != ipmitool && \
-	   test -e $(mandir)/man1/ipmitool.1 ; then \
-		mv -f $(mandir)/man1/ipmitool.1 $(mandir)/man1/@IPMITOOL_BIN@.1 ; \
+	   test -e $(DESTDIR)$(mandir)/man1/ipmitool.1 ; then \
+		mv -f $(DESTDIR)$(mandir)/man1/ipmitool.1 \
+		      $(DESTDIR)$(mandir)/man1/@IPMITOOL_BIN@.1 ; \
 	fi
 
 uninstall-hook:
 	if test @IPMITOOL_BIN@ != ipmitool && \
-	   test -e $(mandir)/man1/@IPMITOOL_BIN@.1 ; then \
-		mv -f $(mandir)/man1/@IPMITOOL_BIN@.1 $(mandir)/man1/ipmitool.1 ; \
+	   test -e $(DESTDIR)$(mandir)/man1/@IPMITOOL_BIN@.1 ; then \
+		mv -f $(DESTDIR)$(mandir)/man1/@IPMITOOL_BIN@.1 \
+		      $(DESTDIR)$(mandir)/man1/ipmitool.1 ; \
 	fi
 
diff --git a/ipmitool/doc/ipmitool.1.in b/ipmitool/doc/ipmitool.1.in
index 28897c0..92471f8 100644
--- a/ipmitool/doc/ipmitool.1.in
+++ b/ipmitool/doc/ipmitool.1.in
@@ -342,7 +342,7 @@ This command will list the contents of the SEL.
 .RS
 .TP
 .I setup
-Setup Serial-over-LAN: enable, set authentication and baud rate.
+Setup Serial-over-LAN: enable, setup authentication and set baud rate to 19200.
 .RE
 .SH "OPEN INTERFACE"
 .LP 
@@ -363,9 +363,16 @@ Once they are loaded there will be a dynamic char device entry that must exist a
 .LP 
 .I mknod /dev/ipmi0 c 254 0
 .LP 
-In order to force @IPMITOOL_BIN@ to make use of the device interface you can specifiy it on the command line:
+In order to force @IPMITOOL_BIN@ to make use of the OpenIPMI device interface you can specifiy it on the command line:
 .PP 
 @IPMITOOL_BIN@ \-I open <expression>
+.SH "LIPMI INTERFACE"
+.LP
+The @IPMITOOL_BIN@ \fIlipmi\fP interface uses the Solaris x86 IPMI kernel device driver.
+.LP
+You can tell @IPMITOOL_BIN@ to use the Solaris IPMI driver with the \fB-I\fR option:
+.PP
+@IPMITOOL_BIN@ \-I lipmi <expression>
 .SH "LAN INTERFACE"
 .LP 
 The @IPMITOOL_BIN@ \fIlan\fP interface communicates with the BMC over an Ethernet LAN connection using UDP under IPv4.  UDP datagrams are formatted to contain IPMI request/response messages with a IPMI session headers and RMCP headers.